Detailed Answer
Emergency handling for a wet remote control: 1. Turn it off immediately (remove battery / key to OFF); 2. Wipe the housing dry and shake out water; 3. Remove the battery and dry the battery compartment with a dry cloth; 4. Put it in a drying box/rice container for 24–48 hours; 5. Only reinstall the battery and test after it's confirmed dry. IP67 products (LIDER LD series) usually survive brief immersion, but turning them on before drying can cause short circuits and damage. For severe water ingress, return for repair.
| Step 1 | Power off, remove battery |
| Drying | 24–48 hours |
| Note | Power on only after dry |
Note:Turning on a wet remote control before drying can burn the circuit board.