Detailed Answer
Each has pros and cons. Wired pendant: no signal interference, no battery needed, low cost, but the operator is limited by cable length, the cable wears easily, and one cannot stay far from hazardous areas. Industrial remote control: free operation, can stay away from hazardous areas, higher efficiency, but needs a battery, has signal dead zones, and costs more. Modern lifting equipment commonly uses a remote control + wired pendant dual-backup scheme: normal operation by remote, and switching to the wired pendant for emergencies in case of failure. Both LDER and XINGJIA support dual-mode configuration.
| Wired | No interference / range-limited |
| Wireless | Free / needs battery |
| Best solution | Dual-mode backup |
Note:For critical equipment, keep a wired pendant as an emergency backup.